FEATURES:

1. Contact type: 1 PDT
2. Type of switch contact: Single contact
3. Contact material: AgSnO
4. Maximum switching voltage: 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or …FBST 500…)
5. Minimum switching voltage: 5 V (at 100 mA)
6. Min. switching current: 10 mA (at 12 V)
7. Maximum inrush current: 10 A (4 s)
8. Limiting continuous current: 6 A
9. Interrupting rating (ohmic load) max: 140 W (at 24 V DC),20 W (at 48 V DC),18 W (at 60 V DC),23 W (at 110 V DC),40 W (at 220 V DC),1500 VA (for 250 V AC)
10. Switching capacity in acc. with DIN VDE 0660/IEC 60947: 2 A (at 24 V, DC13),0.2 A (at 110 V, DC13) ,0.1 A (at 220 V, DC13),3 A (at 24 V, AC15),3 A (at 120 V, AC15) ,3 A (at 230 V, AC15)

SPECIFICATION:

1. Nominal input voltage UN: 48 V DC
2. Typical input current at UN: 9.2 mA
3. Typical response time: 5 ms
4. Typical release time: 8 ms
5. Protective circuit: Reverse polarity protection Polarity protection diode
6. Operating voltage display: yes
7. Power dissipation for nominal condition: 0.44 W
8. Connection name: Coil side
9. Connection method: Screw connection
10. Stripping length: 8 mm
11. Screw thread: M3
12. Conductor cross section solid: 0.14 mm² … 2.5 mm²
13. Conductor cross section flexible: 0.14 mm² … 2.5 mm²
14. Conductor cross section AWG: 26 … 14

RELATED DOCUMENTS:

1. Datasheet.

PARAMETERS:

1. Width: 6.2 mm
2. Height: 80 mm
3. Depth: 94 mm

PACKAGE INCLUDES:

1. 1 X Phoenix Contact Relay Module PLC-RSC- 48DC/21 (2966113)