The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-… is used for electrical isolation, conversion, amplification and filtering of standard signals.On the input side, the analog standard signals 0…20 mA, 4…20 mA, 0…10 V or 1…5V can be selected, on the output side there are two current outputs that can be set independently of one another with a 0…20 mA-, or 4…20mA signal, electrically isolated (4-way isolation).

The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges.Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

FEATURES:

1. No. of channels: 2
2. Maximum transmission error: ≤ 0.2 % (of final value)
3. Transmission error, typical: < 0.1 %
4. Maximum temperature coefficient: < 0.01 %/K
5. Temperature coefficient, typical: < 0.004 %/K
6. Limit frequency (3 dB): approx. 35 Hz
7. Protective circuit: Transient protection
8. Electrical isolation: Basic insulation according to EN 61010
9. Degree of pollution: 2
10. Rated insulation voltage: 50 V AC/DC
11. Test voltage, input/output/supply: 1.5 kV (50 Hz, 1 min.)
12. Electromagnetic compatibility            Conformance with EMC directive
13. Noise emission: EN 61000-6-4
14. Noise immunity: EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
15. Housing material: PBT
16. Assembly instructions: The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.

SPECIFICATIONS:

1. Nominal supply voltage: 24 V DC
2. Supply voltage range: 19.2 V DC … 30 V DC
3. Max. current consumption: < 30 mA (at 24 V DC incl. load)
4. Power consumption: < 600 mW
5. Number of inputs: 1
6. Configurable/programmable: Yes, preconfigured
7. Voltage input signal: 0 V … 10 V,1 V … 5 V
8. Current input signal: 0 mA … 20 mA,4 mA … 20 mA
9. Max. input voltage: 30 V
10. Max. input current: 50 mA
11. Input resistance of voltage input: approx. 100 kΩ
12. Input resistance current input: approx. 50 Ω

CLASSIFICATIONS:

eCl@ss:

1. eCl@ss 4.0: 27210120
2. eCl@ss 4.1: 27210120
3. eCl@ss 5.0: 27210120
4. eCl@ss 5.1: 27210120
5. eCl@ss 6.0: 27210120
6. eCl@ss 7.0: 27210107
7. eCl@ss 8.0: 27210120
8. eCl@ss 9.0: 27210120

ETIM:

1. ETIM 2.0: EC001485
2. ETIM 3.0: EC001485
3. ETIM 4.0: EC001485
4. ETIM 5.0: EC002653

UNSPSC:

1. UNSPSC 6.01: 30211506
2. UNSPSC 7.0901: 39121008
3. UNSPSC 11: 39121008
4. UNSPSC 12.01: 39121008
5. UNSPSC 13.2 : 39121008

RELATED DOCUMENTS:

1. DataSheet

ADVENTAGES:

1. Power supply possible via the foot element (TBUS)
2. Highly-compact isolating amplifier for electrical isolation, conversion, amplification, filtering, and duplication of standard analog signals
3. Duplication of a standard analog signal on two current outputs
4. 4-way isolation
5. Up to 8 signal combinations can be configured using DIP switches

PARAMETERS:

1. Depth: 102.5 mm
2. Width: 6.2 mm
3. Height: 93.1 mm

PACKAGE INCLUDES:

1.  1 x Phoenix Contact Signal duplicator- MINI MCR-SL-UI-2I (2864794)